The Transmig 275 is a single phase MIG plant ideally suiited to rural and heavier maintenance applications where only 240 volt power is available. Offering one of the highest outputs and duty cycles on the market, the Transmig 275 provides superior arc characteristics for gas metal arc welding (GMAW) and flux cored welding (FCAW).

The remote wire feeder features a heavy duty 4-roll drive system that is swivel mounted, with wheels, and supplied with 8 metres of covered interconnection cables, no job will ever be too big or too far for the Transmig 275!

Features:

• 240 volt input
• Huge 275 amp output @ 40% duty cycle
• 24 voltage settings
• Heavy duty 4 roll wire feeder system
• Covered 8 metre interconnection cables
• Heavy duty 50mm Dinse connectors
• Swivel mounted wire feeder with wheels
• 3 year warranty

The Transmig 400 MIG Welding plant has been designed to increase the productivity of the metal fabrication industry.

Performance, Ruggedness and Simplicity have been combined in this versatile MIG welding plant.

Solid wires up to 1.6mm diameter can be run at high duty cycles together with the ability to provide high deposition performance with flux cord wires of up to 2.4mm.

Features:

• 36 fine welding voltage control settings
• Trigger latching
• Heavy duty design and construction
• Dual inductance
• Volt and Amp Meters
• 4 Roll Wire Feeder
• 3 year gold warranty

Features:

• Standards compliant built-in Voltage Reduction Device
• Embedded micro processor with digital controls
• Exceptional DC welding characteristics and arc control
• Fully adjustable welding parameters
• Easy to use digital display and panel controls
• HF start TIG, Lift TIG and Stick weld operations
• 2T, 4T with up/down slope and repeat modes
• Intelligent self diagnostic function
• Single index control knob
• Portable, compact and lightweight

Features:

• Standards compliant built-in Voltage Reduction Device
• Save/Load (recall) weld parameters
• Intelligent fan operation, heat sensing, operates on demand
• Embedded micro processor with digital controls
• Exceptional DC welding characteristics and arc control
• Fully adjustable welding parameters
• Easy to use digital display and panel controls
• HF start TIG, Lift TIG and Stick weld operations
• 2T, 4T with up/down slope and repeat modes
• Intelligent self diagnostic function
• Single index control knob
• Portable, compact and lightweight

Features:

• Standards compliant built-in Voltage Reduction Device
• Save/Load (recall) weld parameters
• Intelligent fan operation, heat sensing, operates on demand
• Embedded micro processor with digital controls
• Exceptional DC welding characteristics and arc control
• Fully adjustable welding parameters
• Easy to use digital display and panel controls
• HF start TIG, Lift TIG and Stick weld operations
• 2T, 4T with up/down slope and repeat modes
• Intelligent self diagnostic function
• Single index control knob
• Portable, compact and lightweight

The Transarc 141VRD is a brand new release, 240 volt, 10 amp, full digital control, DC stick-lift TIG power source. Combine this with features like built in Voltage Reduction Device (VRD), lift TIG arc start, Pulse TIG, built-in hot start, built-in arc control and you've got the ultimate unit designed for precision STICK welding of steel and other DC weldable materials.

All these features are laid out on an easy to use digital display front panel with a single index control knob and push button mode selection.

The VRD improves operator safety. This feature reduces the Open Circuit Voltage to below 20 volts when the welding power source is on while not in use.